Line Magnetic LM-150IA Integrated Amplifier

$7,990.00

The LM-150IA is a Class AB, push-pull, integrated stereo amplifier featuring 4 x KT150 output tubes, delivering 100 watts per channel. Its Pre-in analogue input allows you to use the LM-150IA as a power amplifier.

The tubes we choose are perfectly matched pairs of Shuguang 12AX7, Electro-Harmonix 6SN7, and Tung-sol KT150.

It incorporates high-quality components such as Realcap capacitors and an ALPS potentiometer, with internal point-to-point wiring to ensure optimal reliability.  The rear-illuminated front panel meter makes adjusting the bias remarkably simple.

With this much power available, the LM-150IA integrated amplifier can drive even the most demanding speakers.

Made to Australian standard of 240V~.

We keep a small amount of stock for immediate shipping. Back-order ready to ship in 2-3 weeks.

The LM-150IA is a Class AB, push-pull, integrated stereo amplifier featuring 4 x KT150 output tubes, delivering 100 watts per channel. Its Pre-in analogue input allows you to use the LM-150IA as a power amplifier.

The tubes we choose are perfectly matched pairs of Shuguang 12AX7, Electro-Harmonix 6SN7, and Tung-sol KT150.

It incorporates high-quality components such as Realcap capacitors and an ALPS potentiometer, with internal point-to-point wiring to ensure optimal reliability.  The rear-illuminated front panel meter makes adjusting the bias remarkably simple.

With this much power available, the LM-150IA integrated amplifier can drive even the most demanding speakers.

Made to Australian standard of 240V~.

We keep a small amount of stock for immediate shipping. Back-order ready to ship in 2-3 weeks.

Main Features

Class AB push-pull integrated amplifier

Hand-made construction with the finest point-to-point wiring

Bias control is accessible on top of the amplifier panel with true ampere meter

Soft Start and time-delay (30 seconds) circuit

Specially designed EI transformer for power supply

Two EI output transformers with wide bandwidth

ALPS volume control and high capacity Realcap capacitors

Metal removable tube guard cage

Infrared remote control

 

Specification

Power output: 100W + 100W

Output impedance: 4/ 8/ 16Ω

Analogue Inputs: 3x RCA line inputs and 1x Pre-in

Frequency Response (-1.5dB): 10 – 50 kHz

Signal/Noise ratio: 87dB

THD: 1% (1kHz)

Pre-in: 1000 mV

Input Sensitivity: 220 mV

Input Impedance: 100kΩ

Tubes Complement: 4 x KT150, 2 x 6SN7EH, 1x 12AU7, 2x 12AX7

Power Consumption: 480 W

Voltage: 240V~

Dimensions (W x H x D):  430 x 230 x 355 mm

Net Weight: 32 Kg

You Might Also Like