Front1.JPG
Front with Grill.JPG
Tubes_Closeup.JPG
Back.JPG
Side.JPG
Inputs.JPG
Outputs.JPG
Transformer.JPG
VU Meter.JPG
Volume_Control.JPG
Front1.JPG
Front with Grill.JPG
Tubes_Closeup.JPG
Back.JPG
Side.JPG
Inputs.JPG
Outputs.JPG
Transformer.JPG
VU Meter.JPG
Volume_Control.JPG

Line Magnetic LM-805IA MKII Integrated Amplifier

$9,500.00

The LM-805IA MKII is an integrated stereo amplifier featuring 805 output tubes and is based on the Single Ended Triode (S.E.T.) design, delivering 50 watts of pure Class A power per channel. The legendary LM-805IA recently received extensive upgrades (such as the chassis, tubes, transformers, capacitors, chocks, tube sockets and speaker binding posts) and is now wearing the LM-805IA MKII badge with even better performance.

It incorporates high-quality components such as a 900w power supply transformer with Nippon Steel Ultra-Capacity Toroidal Core, Mundorf N-Cap capacitors‍, ‍and an ALPS potentiometer with internal point-to-point wiring to ensure optimal reliability.  The rear-illuminated front panel meter makes adjusting the bias remarkably simple.

Its substantial power and current-handling capacity allow it to drive a wide variety of speakers. The use of the legendary 805 triode tube contributes to extraordinary musicality. This amp is one of the most popular models and comes highly recommended for audiophiles seeking Line Magnetic's signature sound, with added drive and oomph.

Made to Australian standard of 240V~. Australian local warranty.

Enquire lead time.

Book a private audition

The LM-805IA MKII is an integrated stereo amplifier featuring 805 output tubes and is based on the Single Ended Triode (S.E.T.) design, delivering 50 watts of pure Class A power per channel. The legendary LM-805IA recently received extensive upgrades (such as the chassis, tubes, transformers, capacitors, chocks, tube sockets and speaker binding posts) and is now wearing the LM-805IA MKII badge with even better performance.

It incorporates high-quality components such as a 900w power supply transformer with Nippon Steel Ultra-Capacity Toroidal Core, Mundorf N-Cap capacitors‍, ‍and an ALPS potentiometer with internal point-to-point wiring to ensure optimal reliability.  The rear-illuminated front panel meter makes adjusting the bias remarkably simple.

Its substantial power and current-handling capacity allow it to drive a wide variety of speakers. The use of the legendary 805 triode tube contributes to extraordinary musicality. This amp is one of the most popular models and comes highly recommended for audiophiles seeking Line Magnetic's signature sound, with added drive and oomph.

Made to Australian standard of 240V~. Australian local warranty.

Enquire lead time.

Book a private audition

Main Features

Class A Single-Ended-Triode (S.E.T.) amplifier

Hand-made construction with the finest point-to-point wiring

Bias control is accessible on top of the amplifier panel with true ampere meter

Soft Start and time-delay (30 seconds) circuit

A specially designed 900w Nippon Steel toroidal core transformer for power supply

Two Japanese audio-grade Z11 EI output transformers with wide bandwidth

All transformers and chokes are encapsulated and mounted separately to minimize interference between components.

ALPS volume control and high capacity Mundorf N-Cap capacitors

Metal removable tube guard cage

Infrared remote control

Specification

Class A amplifier - 50W + 50W

Load impedance: 4/ 8/ 16Ω

Analogue Inputs: 4x RCA line inputs and 1x Pre-in

Analogue Outputs: 2 x Screw terminals compatible with banana plugs; 1x Sub Out

Frequency Response (-0.5dB): 20 – 30 kHz

Signal/Noise ratio: 87dB

THD: 1% (1kHz)

Pre-in: 1000 mV

Input Sensitivity: 300 mV (Built-in Mode)

Input Impedance: 100kΩ

Tubes Complement: 2x 805, 2 x 300B, 2 x 12AX7, 2 x 12BH7

Power Consumption: 490 W

Voltage: 240V~

Dimensions (W x H x D):  432 x 279 x 465 mm

Net Weight: 53.5 Kg